Shenzhen FRIDA LCD Co., Ltd
Corporate mission: Promote smart AIOT and enable smart product applications. Corporate vision: Build a leading brand in AIOT field of audio and video solutions. Core values: To achieve customer first,
Add to Cart
21.5 Inch Tft Display 1920x1080 Lvds Interface 30 Pins Full Viewing Angle
General Description:
The MC215CT01-1 uses an LVDS (2 ch, 8-bit) signal interface with a total of 30 pins with terminal connections and a drive screen voltage of 5.0V (Typ.). It has a typical vertical refresh rate of Fv of 60Hz.
Features:
1.LCM Brightness (300) Cd/m2(Typ)
2.Ultra-high Contrast Ratio 3000:1 (Typ)
3.Fast Response Time 7ms (Typ)
4.High Color Saturation NTSC 72% (Typ)
5.DE (Data Enable) Mode
6.LVDS (Low Voltage Differential Signaling) Interface
Specifications:
| Item | Specification | Unit | Note |
| Active Area | 476.64 (H) x 268.11 (V) | mm | - |
| Module Size | 495.6 (H) x 292.2 (V) x 11.8 (D) | mm | - |
| Driver Element | a-Si TFT active matrix | - | - |
| Number of Pixel | 1920 x 1080 | pixel | - |
| Pixel Arrangement | RGB Vertical | - | - |
| Display Colors | 16.7M | color | 8bit |
| Display Mode | Normally Black | - | - |
|
Surface Treatment |
Type=AG | - | - |
| Haze=25% | - | - | |
| Top Surface Hardness : 3H | - | - | |
| LCM Luminance of White | 300 (Typ) | Cd/m2 | Center Point |
| LCM Weight | 1.69 | kg | - |
Absolute Ratings of Environment:
|
Item |
Symbol |
Value |
Unit |
|
| Min. | Max. | |||
| Storage Temperature | TST | -20 | 60 | °C |
| Operating Temperature | TOP | 0 | 50 | °C |
| Panel Surface Temperature of Display Area | PST | - | 65 | °C |
Electrical Specifications:
|
Parameter |
Symbol |
Value |
Unit |
|||
| Min. | Typ. | Max. | ||||
| Power Supply Voltage | VCC | 4.5 | 5 | 5.5 | V | |
| Rush Current | IRUSH | - | - | 4 | A | |
|
Power Supply Current |
White Pattern | Icc | - | 0.72 | 0.94 | A |
| Horizontal Stripe | Icc | - | 0.92 | 1.20 | A | |
| Black Pattern | Icc | - | 0.72 | 0.94 | A | |
Interface Connection:
CN1: 3- 10122314-0 (XDYT) or equivalent 1mm pitch 30 pin (1)
| Pin No. | Symbol | Description | Note |
| 1 | ORX0N | LVDS Data1(0) - | |
| 2 | ORX0P | LVDS Data1(0) + | |
| 3 | ORX1N | LVDS Data1(1) - | |
| 4 | ORX1P | LVDS Data1(1) + | |
| 5 | ORX2N | LVDS Data2(2) - | |
| 6 | ORX2P | LVDS Data2(2) + | |
| 7 | GND | Power Ground | |
| 8 | ORXCN | LVDS clock1 - | |
| 9 | ORXCP | LVDS clock 1+ | |
| 10 | ORX3N | LVDS Data1(3) - | |
| 11 | ORX3P | LVDS Data1(3) + | |
| 12 | ERX0N | LVDS Data2(0) - | |
| 13 | ERX0P | LVDS Data2(0) + | |
| 14 | GND | Power Ground | |
| 15 | ERX1N | LVDS Data2(1) - | |
| 16 | ERX1P | LVDS Data2(1) + | |
| 17 | GND | Power Ground | |
| 18 | ERX2N | LVDS Data2(2) - | |
| 19 | ERX2P | LVDS Data2(2) + | |
| 20 | ERXCN | LVDS clock2 - | |
| 21 | ERXCP | LVDS clock 2+ | |
| 22 | ERX3N | LVDS Data2(3) - | |
| 23 | ERX3P | LVDS Data2(3) + | |
| 24 | NC | No Connection | (1) |
| 25 | NC | No Connection | (1) |
| 26 | NC | No Connection | (1) |
| 27 | NC | No Connection | (1) |
| 28 | VIN5 | Power supply +5.0V | |
| 29 | VIN5 | Power supply +5.0V | |
| 30 | VIN5 | Power supply +5.0V |
Note:(1) For HKC used only, please leave it open.
Optical Specification:
| Item | Symbol | Condition | Min. | Typ. | Max. | Unit | |
|
Color Chromaticity (CIE1931) |
Red |
Rx |
θx=0°,θy=0°Viewing Angle at Normal Direction |
Typ.- 0.03 |
0.631 |
Typ.+ 0.03 |
- |
| Ry | 0.345 | ||||||
|
Green |
Gx | 0.288 | |||||
| Gy | 0.651 | ||||||
|
Blue |
Bx | 0.145 | |||||
| By | 0.047 | ||||||
|
White |
Wx | 0.313 | |||||
| Wy | 0.329 | ||||||
| Color Gamut | CG | 68 | 72 |
- |
% | ||
|
Contrast Ratio |
CR |
2000 |
3000 |
- |
- |
||
| Response Time | Tg |
- |
7.0 | 12 | ms | ||
| Luminous Uniformity | (75) | (80) | % | ||||
| Center Luminance of White | (250) | (300) | Cd/m2 | ||||
|
Viewing Angle |
Horizontal |
θx+ |
CR≧10 |
- | 89 | - |
Deg. |
| θx - | - | 89 | - | ||||
|
Vertical |
θy+ | - | 89 | - | |||
| θy- | - | 89 | - | ||||
Handling Precautions:
Disconnect power supply before handling LCD module.
Do not pull or fold the Light-Bar cable.
Do not touch the parts inside LCD modules and the fluorescent lamp’s connector or cables in order to prevent electric shock.