
Add to Cart
21.5 Inch Lcd Panel 1920x1080 Lvds Interface 30 Pins 250 Nits M215HJJ-L30
General Description:
The M215HJJ-L30 display resolution is 1920 (RGB) x 1080 (FHD), aspect ratio is 16:9 (W:H), and the pixels are arranged in vertical RGB stripes. The backlight is a 4 strings WLED illuminated side-entry light source (left) with 40K hours of life without backlight driver.
Specifications:
Item | Specification | Unit |
Screen Size | 21.5” real diagonal | |
Driver Element | a-si TFT active matrix | - |
Pixel Number | 1920 x R.G.B. x 1080 | pixel |
Pixel Pitch | 0.24795 (H) x 0.24795 (V) | mm |
Pixel Arrangement | RGB vertical stripe | - |
Display Colors | 16.7M | color |
Transmissive Mode | Normally black | - |
Surface Treatment | High resolution adaptable AG,3H hard coating, Haze 25% | - |
Luminance, White | 250 | Cd/m2 |
Color Gamut | 72% of NTSC(Typ.) | - |
Display Orientation | Signal input with “ INX” | |
TCO | TCO 7.0 compliance | |
Power Consumption | Total 16.42 W@ cell 5.6 W, BL 10.82 (W) MAX, |
Absolute Maximum Ratings:
Item | Symbol | Value | Unit | |
Min. | Max. | |||
Storage Temperature | TST | -20 | 60 | ºC |
Operating Ambient Temperature | TOP | 0 | 50 | ºC |
Electrical Specifications:
Parameter | Symbol | Value | Unit | ||||
Min. | Typ. | Max. | |||||
Power Supply Voltage | Vcc | 4.5 | 5.0 | 5.5 | V | ||
Ripple Voltage | VRP | - | - | 300 | mV | ||
Rush Current | IRUSH | - | - | 3 | A | ||
Power Supply Current | White |
- - - |
- | 768 | 910 | mA | |
Black | - | 720 | 845 | mA | |||
Vertical Stripe | - | 948 | 1105 | mA | |||
Power Consumption | PLCD | - | 4.8 | 5.6 | Watt | ||
LVDS interface |
Differential Input Voltage | VID | 100 | - | 600 | mV | |
Common Input Voltage | VCM | 1.0 | 1.2 | 1.4 | V | ||
Differential Input High Threshold Voltage | VTH | - | - | + 100 | mV | ||
Differential Input Low Threshold Voltage | VTL | -100 | - | - | mV |
Parameter | Symbol | Value | Unit | ||
Min. | Typ. | Max. | |||
LED Light Bar Input Voltage Per Input Pin | VPIN | 33.67 | 37.7 | 41.6 | V |
LED Light Bar Current Per Input Pin | IPIN | -- | 65 | 69 | mA |
LED Life Time | LLED | 40000 | -- | -- | Hrs |
Power Consumption | PBL |
-- |
9.802 | 10.82 | W |
Interface Connection:
Pin | Name | Description |
1 | RXO0- | Negative LVDS differential data input. Channel O0 (odd) |
2 | RXO0+ | Positive LVDS differential data input. Channel O0 (odd) |
3 | RXO1- | Negative LVDS differential data input. Channel O1 (odd) |
4 | RXO1+ | Positive LVDS differential data input. Channel O1 (odd) |
5 | RXO2- | Negative LVDS differential data input. Channel O2 (odd) |
6 | RXO2+ | Positive LVDS differential data input. Channel O2 (odd) |
7 | GND | Ground |
8 | RXOC- | Negative LVDS differential clock input. (odd) |
9 | RXOC+ | Positive LVDS differential clock input. (odd) |
10 | RXO3- | Negative LVDS differential data input. Channel O3(odd) |
11 | RXO3+ | Positive LVDS differential data input. Channel O3 (odd) |
12 | RXE0- | Negative LVDS differential data input. Channel E0 (even) |
13 | RXE0+ | Positive LVDS differential data input. Channel E0 (even) |
14 | GND | Ground |
15 | RXE1- | Negative LVDS differential data input. Channel E1 (even) |
16 | RXE1+ | Positive LVDS differential data input. Channel E1 (even) |
17 | GND | Ground |
18 | RXE2- | Negative LVDS differential data input. Channel E2 (even) |
19 | RXE2+ | Positive LVDS differential data input. Channel E2 (even) |
20 | RXEC- | Negative LVDS differential clock input. (even) |
21 | RXEC+ | Positive LVDS differential clock input. (even) |
22 | RXE3- | Negative LVDS differential data input. Channel E3 (even) |
23 | RXE3+ | Positive LVDS differential data input. Channel E3 (even) |
24 | GND | Ground |
25 | NC | For LCD internal use only, Do not connect |
26 | NC | For LCD internal use only, Do not connect |
27 | NC | For LCD internal use only, Do not connect |
28 | Vcc | +5.0V power supply |
29 | Vcc | +5.0V power supply |
30 | Vcc | +5.0V power supply |
Note (1) Connector Part No:WF13-422-3033(Fullconn) or 187098-30091(P-two) equivalent
Note (2) User connector Part No:Mating Wire Cable Connector Part No: FI-X30H(JAE) or FI-X30HL(JAE)
Mating FFC Cable Connector Part No: 217007-013001 (P-TWO) or JF05X030-1 (JAE).
Optical Specification:
Item | Symbol | Condition | Min. | Typ. | Max. | Unit | |
Color Chromaticity (CIE 1931) |
Red | Rx |
θx=0°, θY =0° CS-2000 R=G=B=255 Gray scale |
Typ – 0.03 |
0.644 |
Typ + -0.03 |
- |
Ry | 0.337 | ||||||
Green | Gx | 0.317 | |||||
Gy | 0.617 | ||||||
Blue | Bx | 0.152 | |||||
By | 0.054 | ||||||
White | Wx | 0.313 | |||||
Wy | 0.329 | ||||||
Center Luminance of White(Center of Screen) | LC | 200 | 250 | - | cd/m2 | ||
Contrast Ratio | CR | 2000 | 3000 | - | - | ||
Respone Time |
R | 20 | 25 | ms | |||
F | 5 | 10 | ms | ||||
TGtG_AVE_ | θx=0°, θY =0° | - | 30 | 35 | ms | ||
White Variation | W | θx=0°, θY =0° | 70 | - | - | % | |
Viewing Angle | Horizontal | θx- + θx+ | CR ≧ 10 | 160 | 178 | - | Deg. |
Vertical | θy- + θy+ | 160 | 178 | - |
Handling Precautions:
1.Do not pull the I/F connector in or out while the module is operating.
2.Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and easily scratched.
3.It is dangerous that moisture come into or contacted the LCD module, because moisture may damage LCD module when it is operating.