
Add to Cart
36.6 Inch Bar Type Tft Lcd 1920x290 Ips Viewing Angle Lvds Interface 51 Pins
General Description:
The DV366FBM-N10 display resolution is 1920(RGB)×290, aspect ratio is >3:1 (W:H), and the pixels are arranged in vertical RGB stripes. Its display area size is 919.3×138.85 (W×H) mm, viewing size is 924.3×143.85 (W×H) mm, exterior size is 960(W)×174.35(H)×16.9(D) mm, surface finish is matte (Haze 1%), and product net weight is 3.26Kgs (Typ.).
Specifications:
Parameter | Specification | Unit | Remarks |
Active area | 919.3(H) × 138.85 (V) | mm | |
Number of pixels | 1920(H) × 290(V) | pixels | |
Pixel pitch | 159.6(H) × 478.8(V) | um | |
Pixel arrangement | Pixels RGB Vertical stripe | ||
Display colors | 16.7M | colors | 8bits True |
Display mode | Normally Black | ||
Dimensional outline | 960(H)*174.35(V)*16.9(B) | mm | Detail refer to drawing |
Weight | 3260 | g | |
Power Consumption | 5.4 | Watt | Typ. |
Bezel width (L/R/U/D) | 17.85/17.85/15.25/15.25 | mm | |
Surface Treatment | Haze 1% | ||
Back-light | Down edge side, 2- LED Light bar | ||
Possible display type | Landscape and Portrait Enabled |
Absolute Maximum Ratings:
Parameter | Symbol | Min. | Max. | Unit | Remark |
Power Supply Voltage | VDD | VSS-0.3 | 13.5 | V | Ta = 25 ℃ |
Operating Temperature | TOP | 0 | +50 | ℃ |
|
Storage Temperature |
TSUR |
-20 | +60 | ℃ | |
TST |
-20 | +60 | ℃ | ||
Operating Ambient Humidity |
Hop | 10 | 80 | %RH | |
Storage Humidity | Hst | 10 | 80 | %RH |
Electrical Specifications:
Parameter | Symbol | Values | Unit | |||
Min | Typ | Max | ||||
Power Supply Input Voltage | VDD | 10.8 | 12 | 13.2 | Vdc | |
Power Supply Ripple Voltage | VRP | - | - | 300 | mV | |
Power Supply Current | IDD | - | 450 | 600 | mA | |
Power Consumption | PDD | - | 5.4 | 8 | Watt | |
Rush current | IRUSH | - | 3.0 | A | ||
LVDS Interface |
Differential Input High Threshold Voltage | VLVTH | +100 |
- |
+300 | mV |
Differential Input Low Threshold Voltage |
VLVTL | -300 |
- |
-100 | mV | |
Input Differential Voltage | | VID | | 200 | - | 600 | mV | |
Common Input Voltage |
VLVC |
0.6 |
1.2 |
2.4- |VID |/2 |
V |
|
CMOS Interface |
Input High Threshold Voltage | VIH | 2.7 |
- |
3.3 | |
Input Low Threshold Voltage |
VIL | 0 |
- |
0.6 | V |
Interface Connection:
Pin No | Symbol | Description | Pin No | Symbol | Description |
1 | GND | Ground | 16 | ERX2- | Even pixel Negative LVDS differential data input. |
2 | SCL | I2C Clock | 17 | ERX2+ | Even pixel Negative LVDS differential data input. |
3 | SDA | I2C Data | 18 | GND | Ground |
4 | NC | No Connection | 19 | ECLK- | Even pixel Negative LVDS differential clock input. |
5 | NC | No Connection | 20 | ECLK+ | Even pixel Negative LVDS differential clock input. |
6 | NC | No Connection | 21 | GND | Ground |
7 | SELLVDS | LVDS data format selection | 22 | ERX3- | Even pixel Negative LVDS differential data input. |
8 | NC | No Connection | 23 | ERX3+ | Even pixel Negative LVDS differential data input. |
9 | NC | No Connection | 24 | NC | No Connection |
10 | NC | No Connection | 25 | NC | No Connection |
11 | GND | Ground | 26 | GND | Ground |
12 | ERX0- |
Even pixel Negative LVDS diffe rential data input. |
27 | GND | Ground |
13 | ERX0+ | Even pixel Negative LVDS differential data input. | 28 | ORX0- | Odd pixel Negative LVDS differential data input. |
14 | ERX1- | Even pixel Negative LVDS differential data input. | 29 | ORX0+ | Odd pixel Negative LVDS differential data input. |
15 | ERX1+ | Even pixel Negative LVDS differential data input. | 30 | ORX1- | Odd pixel Negative LVDS differential data input. |
31 | ORX1+ | Odd pixel Negative LVDS differential data input. | 42 | GND | Ground |
32 | ORX2- | Odd pixel Negative LVDS differential data input. | 43 | GND | Ground |
33 | ORX2+ | Odd pixel Negative LVDS differential data input. | 44 | GND | Ground |
34 | GND | Ground | 45 | GND | Ground |
35 | OCLK- | Odd pixel Negative LVDS differential clock input. | 46 | GND | Ground |
36 | OCLK+ | Odd pixel Negative LVDS differential clock input. | 47 | NC | No Connection |
37 | GND | Ground | 48 | VCC | +12V |
38 | ORX3- | Odd pixel Negative LVDS differential data input. | 49 | VCC | +12V |
39 | ORX3+ | Odd pixel Negative LVDS differential data input. | 50 | VCC | +12V |
40 | NC | No Connection | 51 | VCC | +12V |
41 | NC | No Connection |
Optical Specification:
Parameter | Symbol | Condition | Min | Typ | Max | Unit | ||
Viewing Angle |
Horizontal |
Θ3 |
CR > 10 |
80 | 89 | - | Deg. | |
Θ9 | 80 | 89 | - | Deg. | ||||
Vertical |
Θ12 | 80 | 89 | - | Deg. | |||
Θ6 | 80 | 89 | - | Deg. | ||||
Brightness | Lv |
Θ=0° (Center) Normal Viewing Angle |
560 | 700 | - | nit | ||
Contrast ratio | CR | 800:1 | 1200:1 | - | ||||
White Iuminance uniformity | ΔY | 75 |
- |
- |
% | |||
Reproduction of color |
White |
Wx |
TYP. - 0.03 |
0.289 |
TYP. + 0.03 |
|||
Wy |
0.332 | |||||||
Red |
Rx |
0.650 | ||||||
Ry |
0.341 | |||||||
Green |
Gx |
0.304 | ||||||
Gy |
0.625 | |||||||
Blue |
Bx |
0.148 | ||||||
By |
0.071 | |||||||
Color Gamut | 70 | 72 | - | % | ||||
Response Time | G to G | Tg | - | 8 | 10 | ms |
Handling Precautions:
1.Please do not give any mechanical and/or acoustical impact to LCM. Otherwise, LCM can’t be operated its full characteristics perfectly.
2.The conductive material and signal cables are kept away from LED driver inductor to prevent abnormal display, sound noise and temperature rising.