Shenzhen FRIDA LCD Co., Ltd
Corporate mission: Promote smart AIOT and enable smart product applications. Corporate vision: Build a leading brand in AIOT field of audio and video solutions. Core values: To achieve customer first,
Add to Cart
47.1 Inch Bar Type Tft Display 3840x160 Ips Viewing Angle Lvds Interface 51 Pins
General Description:
DV471FBM-N10 has an operating temperature of 0 ~ 50°C, a storage temperature of -20 ~ 60°C, and a vibration resistance of 1.5G (14.7 m/s²). Based on its features such as white LED backlight, life time > 50,000 hours, LED driver included, ultra-wide screen, matte surface, etc., this model is recommended for digital signage, cutting bar screen.
Specifications:
| Parameter | Specification | Unit | Remarks |
| Active area | 1196. 16(H) × 49.84 (V) | mm | |
| Number of pixels | 3840(H) × 160(V) | pixels | 1Pixel=(R+G+B) Dot |
| Pixel pitch | 311.5(H) × 311.5(V) | um | R/G:103.83, B:103.84 |
| Pixel arrangement | Pixels RGB Vertical stripe | ||
| Display colors | 16.7M | colors | 8bits True |
| Display mode | Normally Black | ||
| Dimensional outline | 1209(H)*62.9(V)*14.5(B) | mm | |
| Weight | TBD | g | |
| Power Consumption | 17W | Watt | Estimate: 6.5W for P anel, 10.5W for BLU |
| Bezel width (L/R/U/D) | 5.4/5.4/5.2/6.8 | mm | |
| Surface Treatment | Haze 25% | ||
| Back-light | Horizontal arranged, 2-LED Lighting Bar type |
Absolute Maximum Ratings:
| Parameter | Symbol | Min. | Max. | Unit | Remark |
|
Power Supply Voltage |
VDD | VSS-0.3 | 13.2 | V |
Ta = 25 ℃ |
| VBL | VSS-0.3 | 13.2 | V | ||
| Operating Temperature | TOP | 0 | +50 | ℃ |
|
|
Storage Temperature |
TSUR |
-20 | +60 | ℃ | |
|
TST |
-20 | +60 | ℃ | ||
| Operating Ambient Humidity | Hop | 10 | 80 | %RH | |
| Storage Humidity | Hst | 10 | 80 | %RH |
Electrical Specifications:
| Parameter | Symbol | Values | Unit | |||
| Min | Typ | Max | ||||
| Power Supply Input Voltage | VDD | 10.8 | 12 | 13.2 | Vdc | |
| Power Supply Ripple Voltage | VRP | 300 | mV | |||
| Power Supply Current | IDD | - | 542 | 1000 | mA | |
| Power Consumption | PDD | 6.5 | 13.2 | Watt | ||
|
Rush current |
IRUSH |
- |
10 |
A |
||
|
V-by-One Interface |
Differential Input High Threshold Voltage | VLVTH |
- |
- |
+50 | mV |
|
Differential Input Low Threshold Voltage |
VLVTL | -50 |
- |
- |
mV | |
|
CMOS Interface |
Input High Threshold Voltage |
VIH | 2.0 |
- |
3.3 | |
|
Input Low Threshold Voltage |
VIL | 0 |
- |
0.8 | V | |
Interface Connection:
| Pin No | Description | Pin No | Description |
| 1 | VDD _12V | 16 | NC, For BOE Internal use |
| 2 | VDD _12V | 17 | NC, For BOE Internal use |
| 3 | VDD _12V | 18 | NC, For BOE Internal use |
| 4 | VDD _12V | 19 | NC, For BOE Internal use |
| 5 | VDD _12V | 20 | NC |
| 6 | VDD _12V | 21 | NC |
| 7 | VDD _12V | 22 | SEL-Section |
| 8 | VDD _12V | 23 | NC |
| 9 | NC | 24 | GND |
| 10 | GND | 25 | HTPDN |
| 11 | GND | 26 | LOCKN |
| 12 | GND | 27 | GND |
| 13 | GND | 28 | Rx0n |
| 14 | NC, For BOE Internal use | 29 | Rx0p |
| 15 | NC, For BOE Internal use | 30 | GND |
| 31 | Rx1n | 42 | GND |
| 32 | Rx1p | 43 | Rx5n |
| 33 | GND | 44 | Rx5p |
| 34 | Rx2n | 45 | GND |
| 35 | Rx2p | 46 | Rx6n |
| 36 | GND | 47 | Rx6p |
| 37 | Rx3n | 48 | GND |
| 38 | Rx3p | 49 | Rx7n |
| 39 | GND | 50 | Rx7p |
| 40 | Rx4n | 51 | GND |
| 41 | Rx4p |
Optical Specification:
| Parameter | Symbol | Condition | Min | Typ | Max | Unit | ||
|
Viewing Angle |
Horizontal |
Θ3 |
CR > 10 |
85 | 89 | - | Deg. | |
| Θ9 | 85 | 89 | - | Deg. | ||||
|
Vertical |
Θ12 | 85 | 89 | - | Deg. | |||
| Θ6 | 85 | 89 | - | Deg. | ||||
| Brightness | Lv |
Θ=0° (Center) Normal Viewing Angle |
400 | 500 | - | nit | ||
| Contrast ratio | CR | 700:1 | 1000:1 | - | ||||
| White Iuminance uniformity | ΔY | 75 |
- |
- |
% | |||
|
Reproduction of color |
White |
Wx |
-0.03 |
0.313 |
+0.03 |
|||
|
Wy |
0.329 | |||||||
|
Red |
Rx |
TBD | ||||||
|
Ry |
TBD | |||||||
|
Green |
Gx |
TBD | ||||||
|
Gy |
TBD | |||||||
|
Blue |
Bx |
TBD | ||||||
|
By |
TBD | |||||||
| Color Gamut | 70 | 72 | % | |||||
| Response Time | G to G | Tg | ms | |||||
Handling Precautions:
1.Be careful for condensation at sudden temperature change. Condensation makes damage to polarizer or electrical contacted parts. And after fading condensation, smear or spot will occur.
2.The cables should be as short as possible between System Board and PCB interface.