R101B40-226-0101 power supply voltage is 3.3V,frame rate is 60Hz,clock frequency is 72.4MHz, the duration of rush current is about 2ms and rising time of Power Input is 1ms(min).

Specifications:

Parameter	Specification	Unit
Active Area	216.96(H)*135.6(V)	mm
Number Of Pixels	1280(H)×800(V)	pixels
Pixel Pitch	0.0565(H)×RGB×0.1695(V)	mm
Pixel Arrangement	Pixels RGB stripe arrangement
Display Mode	Normally Black
Display Colors	16.7M(6bit +Hi-FRC)	colors
Surface Treatment	HC
Contrast Ratio	1000:1(typ.)
Viewing Angle(CR>10)	80/80/80/80(typ.)
Response Time	35(typ.)/40(max.)	ms
Color Gamut	50%NTSC
Power Consumption	Panel: 0.7(Typ.)	watt
Outline Dimension	221.96(H)144.43(V)1.06(typ)(FOB -Panel)	mm

Absolute Maximum Ratings:

Parameter		Symbol	Min.	Max.	Unit	Remarks
Power Supply	LCD Module	VDD	VSS-0.3	3.6	V	Ta = 25 ℃
Operating Temperature		TOP	-20	+70	℃
Storage Temperature		TST	-30	+80	℃
Operating Ambient Humidity		Hop	10	90	%RH
Storage Humidity		Hst	10	90	%RH

Electrical Specifications:

Parameter		Symbol	Values			Unit
Parameter		Symbol	Min.	Typ.	Max.	Unit
Power Supply Voltage		VDD	3.0	3.3	3.6	V
Power Supply Voltage		VRP			300	mV
Power Supply Current		IDD	-	212	364	mA
Power Consumption		PLCD	-	0.7	1.2	W
Rush current		IRUSH	-	-	3.0	A
CMOS Interface	Input Voltage	VIH	2.7		3.3	V
	Input Voltage	VIL	0		0.5	V
	Output Voltage	VOH	2.7		3.3	V
	Output Voltage	VOL	0		0.5	V

Interface Connection:

Pin No.	Symbol	Description	I/O
1	NC	Non Connection	-
2	VDDIN	Power supply VDDIN=3.3V (Typ.)	P
3	VDDIN		P
4	VDDIN		P
5	NC	Non Connection	-
6	GND	GROUND	P
7	GND	GROUND	P
8	RIN0-	LVDS Negative data signal (-)	I
9	RIN0+	LVDS Positive data signal (+)	I
10	GND	GROUND	P
11	RIN1-	LVDS Negative data signal (-)	I
12	RIN1+	LVDS Positive data signal (+)	I
13	GND	GROUND	P
14	RIN2-	LVDS Negative data signal (-)	I
15	RIN2+	LVDS Positive data signal (+)	I
16	GND	GROUND	P
17	LVDS_CLK-	LVDS Negative CLK signal (-)	I
18	LVDS_CLK+	LVDS Positive CLK signal (+)	I
19	GND	GROUND	P
20	RIN3-	LVDS Negative data signal (-)	I

21	RIN3+	LVDS Positive data signal (+)	I
22	GND	GROUND	P
23	NC	Non Connection	-
24	NC	Non Connection	-
25	GND	GROUND	P
26	NC	Non Connection	-
27	NC	Non Connection	-
28	GND	GROUND	P
29	NC	Non Connection	-
30	NC	Non Connection	-
31	LED-	LED Cathode	O
32	LED-		O
33	LED-		O
34	NC	Non Connection	-
35	NC	Non Connection	-
36	NC	Non Connection	-
37	NC	Non Connection	-
38	LED+	LED Anode	P
39	LED+		P
40	LED+		P

Optical Specification:

Item	Symbol	Condition	Min	Typ.	Max	Unit
Viewing Angle	θL	Cr≥10	70	80	--	deg
	θR		70	80	--
	θT		70	80	--
	θB		70	80	--
Contrast Ratio	Cr	θ=0° FF=0°	--	1000		-
Response Time	Tr+Tf	θ=0° FF=0°	--	35	40	ms
Color Coordinate of CIE1 931	Rx	θ=0°		--		-
	Ry			--
	Gx			--
	Gy			--
	Bx			--
	By			--
	Wx			--
	Wy			--
NTSC Ratio	NTSC	CIE1931	45	50	--	%
Gamma	-		1.9	2.2	2.5
Polarization Direction of Front Polarizer	PdF	-		0		deg
Polarization Direction of Rear Polarizer	PdR	-		90		deg

Handling Precautions:

1.Do not display the fixed pattern for a long time because it may develop image sticking due to the LCD structure. If the screen is displayed with fixed pattern, use a screen saver .

2.Do not store the LCD near organic solvents or corrosive gasses.

Product Tags:

8.4 inch tft lcd display

12.1 tft lcd monitor

p3 led screen resolution

Inquiry Cart 0