Shenzhen FRIDA LCD Co., Ltd
Corporate mission: Promote smart AIOT and enable smart product applications. Corporate vision: Build a leading brand in AIOT field of audio and video solutions. Core values: To achieve customer first,
Add to Cart
10.1 Inch Tft Screen 1280x800 With Lvds Interface 45 Pins BP101WX1-300
General Description:
BP101WX1-300 light side of the 10S4P WLED light-emitting side entry light source (bottom), the light source life is 15K hours, without backlight driver. It adopts LVDS (1 ch, 8-bit) signal interface with a total of 45 pins with terminal connection and a drive screen voltage of 3.3V (Typ.). It has a typical vertical refresh rate of Fv of 60Hz.
Specifications:
| Parameter | Specification | Unit | Remarks |
| Active area | 216.96(H) x 135.6(V) | mm | |
| Number of pixels | 1280(H) × 800(V) | pixels | |
| Pixel pitch | 0.1695 (H) X0.1695 (V)× RGB | mm | |
| Pixel arrangement | Pixels RGB stripe arrangement | ||
| Display colors | 16777216(8bits ) | colors | |
| Display mode | Transmission mode, Normally Black | ||
| Outline Dimension | 228.21(H)*148.86(V)*2 .39(D) typ. | mm | Tolerance:± 0.2 |
| Weight | 145 (max) | gram | |
| Surface Treatment | Hard Coating, 3H, Low Reflection (Front Polarizer) | ||
| Back-light | Bottom edge side, 1-LED Lighting bar type | 40*LED Array |
Absolute Maximum Ratings:
| Parameter | Symbol | Min. | Typ. | Max. | Unit |
| Power Supply Voltage (LCD Module) | VDD | 3 | 3.3 | 3.6 | V |
| Back-light Power Supply Voltage | HVDD | - | 31 | 34 | V |
| Back-light LED Current | I LED | - | 76 | 80 | mA |
| Back-light LED Reverse Voltage | VR | - | - | 5 | V |
| Operating Temperature | TOP | -20 | - | +65 | ℃ |
| Storage Temperature | TST | -40 | - | +80 | ℃ |
Electrical Specifications:
| Parameter | Symbol | Values | Unit | Notes | ||
| Min | Typ | Max | ||||
| Power Supply Input Voltage | VDD | 3.0 | 3.3 | 3.6 | V | - |
| Power Supply Current | IDD | - | - | 260 | mA | |
| Back-Light Power Supply Voltage | HvDD | - | 31 | - | V | |
| Back-Light Power Supply Current | IHVDD | - | 76 | - | mA | |
| Positive-going Input Threshold Voltage | VIT+ |
- |
- |
+100 | mV |
Vcom = 1.2V typ. |
|
Negative-going Input Threshold Voltage |
VIT- | - 100 |
- |
- |
mV | |
| Differential input common mode voltage |
Vcom |
- |
1.2 |
- |
V | VIH=100mV, VIL=- 100mV |
|
Power Consumption |
PD | - | - | 0.85 | W | |
| PBL | - | - | 2.7 | W | ||
| PTotal | - | - | 3.55 | W | ||
Interface Connection:
| Pin | Symbol | Functions | Pin | Symbol | Functions |
| 1 | GND1 | Ground | 24 | RXin1N |
-LVDS differential data (G1-G5, B0-B1) |
| 2 | ID_CHK | ID_CHK | 25 | RXin1P |
+LVDS differential data (G1-G5, B0-B1) |
| 3 | NC1 | No connection | 26 | GND8 | Ground |
| 4 | 3.3V | Logic power 3.3V | 27 | RXin0N |
-LVDS differential data (R0-R5, G0) |
| 5 | 3.3V | Logic power 3.3V | 28 | RXin0P |
+LVDS differential data (R0-R5, G0) |
| 6 | 3.3V | Logic power 3.3V | 29 | GND9 | Ground |
| 7 | 3.3V | Logic power 3.3V | 30 | GND10 | Ground |
| 8 | 3.3V | Logic power 3.3V | 31 | NC2 | No connection |
| 9 | WPN | No connection | 32 | FB1 | LED FB1 |
| 10 | SCL | No connection | 33 | FB2 | LED FB2 |
| 11 | SDA | No connection | 34 | FB3 | LED FB3 |
| 12 | GND2 | Ground | 35 | FB4 | LED FB4 |
| 13 | GND3 | Ground | 36 | FB5 | No connection |
| 14 | GND4 | Ground | 37 | FB6 | No connection |
| 15 | RXin3N | -LVDS differential data (R6,R7,G6,G6,B6,B7) | 38 | NC3 | No connection |
| 16 | RXin3P |
+LVDS differential data (R6,R7,G6,G6,B6,B7) |
39 | VLED1 | LED Power supply Voltage |
| 17 | GND5 | Ground | 40 | VLED2 | LED Power supply Voltage |
| 18 | LVDS_RX_N | - LVDS differential clock input | 41 | VLED3 | LED Power supply Voltage |
| 19 | LVDS_RX_P | + LVDS differential clock input | 42 | VLED4 | LED Power supply Voltage |
| 20 | GND6 | Ground | 43 | VLED5 | LED Power supply Voltage |
| 21 | RXin2N | -LVDS differential data (B2-B5, HS, VS, DE) | 44 | NC4 | No connection |
| 22 | RXin2P | +LVDS differential data (B2-B5, HS, VS, DE) | 45 | GND11 | Ground |
| 23 | GND7 | Ground |
Optical Specification:
| Parameter | Symbol | Condition | Min. | Typ. | Max. | Unit | |||
| Viewing Angle range | Horizontal | Θ3 |
CR > 10 |
80 | 89 | - | Deg. | ||
| Θ9 | 80 | 89 | - | Deg. | |||||
| Vertical |
Θ12 |
80 | 89 | - | Deg. | ||||
| Θ6 | 80 | 89 | - | Deg. | |||||
| Color Gamut | - | 50 | - | % | |||||
| Luminance Contrast ratio | CR | Θ = 0° | 720 | 900 | - | ||||
|
Luminace of White |
Center | Yw |
Θ = 0° |
400 | 450 |
- |
cd/m2 | ||
|
White Luminance unifomity |
9 Points |
△Y9 |
80 |
90 |
- |
% | |||
| White Balance |
Color Temp |
Θ = 0° | 6000 | 7000 | 8000 | K | |||
|
Reproduction of color |
White |
Wx |
Θ = 0° |
Typ.-0.03 |
0.304 |
Typ.+0.03 |
|||
|
Wy |
0.333 | ||||||||
| Red |
Rx |
0.601 | |||||||
|
Ry |
0.347 | ||||||||
| Green |
Gx |
0.322 | |||||||
|
Gy |
0.580 | ||||||||
| Blue |
Bx |
0.147 | |||||||
| By | 0.126 | ||||||||
| Response Time (Rising+Falling) | TRT | Ta= 25℃ Θ=0° | - | 25 | - | ms | |||
| Gray Scale | Gamma | Θ = 0° | 2.35 | 2.6 | 2.85 | ||||
Handling Precautions:
1.Obey the supply voltage sequence. If wrong sequence is applied, the module would be damaged.
2.Put the module display side down on a flat horizontal plane.