Shenzhen FRIDA LCD Co., Ltd
Corporate mission: Promote smart AIOT and enable smart product applications. Corporate vision: Build a leading brand in AIOT field of audio and video solutions. Core values: To achieve customer first,
Add to Cart
11.6 Inch 1920x1080 Tft Lcd Display All Viewing Angle 30 Pin Edp 220 Nit
General Description:
The manufacturer of M116B30-040-121-0102 is BOE, the interface type is 30 PIN EDP, and the surface treatment is Anti-glare coating: (3H). It is composed of color TFT-LCD panel, driver IC, control circuit and power circuit. Graphics and provides +3.3V DC power supply voltage for TFT-LCD panel drivers by using the EmbeddedDisplay Port (eDP) Ver1.2 interface.
Specifications:
| Parameter | Specification | Unit | Note |
| Display size | 11.6” (Diagonal) | inch | |
| Active area | 256.32(H) ×144 . 18(V) | mm | |
| Pixel Format | 1920(H) ×1080(V) (1pixel = R + G + B dot) | pixel | |
| Pixel pitch | 0.1335(H) x 0.1335 (V) | mm | |
| Pixel configuration | R, G, B vertical stripe | ||
| Display mode | Normally black | ||
|
Surface treatment of front polarizer |
Anti-glare coating: (3H) |
Interface Connection:
| Pin No. | Symbol | I/O | Function | Remark |
| 1 | CABC_EN / NC | - | Reserved for CD | [Note1] |
| 2 | H_GND | P | High Speed round | [Note2] |
| 3 | Lane1_N | I | Complement Signal Link Lane 1 | |
| 4 | Lane1_P | I | True Signal Link Lane 1 | |
| 5 | H_GND | P | High Speed round | [Note2] |
| 6 | Lane0_N | I | Complement Signal Link Lane 0 | |
| 7 | Lane0_P | I | True Signal Link Lane 0 | |
| 8 | H_GND | P | High Speed round | [Note2] |
| 9 | AUX_CH_P | I | True Signal Auxiliary Channel | |
| 10 | AUX_CH_N | I | Complement Signal Auxiliary Channel | |
| 11 | H_GND | P | High Speed round | [Note2] |
| 12 | LCD_VDD | P | LCD logic and driver power(3.3V) | |
| 13 | LCD_VDD | P | LCD logic and driver power(3.3V) | |
| 14 | NC | I | Reserved for LCD manufacturer’s use | [Note1] |
| 15 | LCD_GND | P | LCD logic and driver ground | |
| 16 | LCD_GND | P | LCD logic and driver ground | |
| 17 | HPD | O | HPD signal pin | |
| 18 | LED-1 | P | Backlight ground | |
| 19 | LED-2 | P | Backlight ground | |
| 20 | LED-3 | P | Backlight ground | |
| 21 | LED-4 | P | Backlight ground | |
| 22 | BL_ENABLE | I | Backlight on/off | |
| 23 | BL_PWM_DIM | I | System PWM | |
| 24 | SCL/NC | - | Reserved for LCD manufacturer’s use | [Note1] |
| 25 | SDA/NC | - | Reserved for LCD manufacturer’s use | [Note1] |
| 26 | BL_PWR | P | Backlight power | |
| 27 | BL_PWR | P | Backlight power | |
| 28 | BL_PWR | P | Backlight power | |
| 29 | BL_PWR | P | Backlight power | |
| 30 | NC | - | Reserved for LCD manufacturer’s use | [Note1] |
[Note]:P: POWER I: Input O: Output
[Note1] Don’t input any signals or any powers into a NC pin. Keep the NC pin open.
[Note2] The shielding case is connected with signal GND.Connector used :20455-030E-76(I-PEX),Corresponding connector : 20453-030T (I-PEX)
Absolute Maximum Ratings:
| Parameter | Symbol | Condition | Ratings | Unit | Remark | |
| MIN | MAX | |||||
| +3.3V supply voltage | VDD | Ta=25℃ | -0.3 | +3.6 | V | |
| Backlight supply voltage | VBL | Ta=25℃ | -0.3 | +21 | V | |
| Input voltage(eDP) | VI | Ta=25℃ | -0.3 | +1.5 | V | |
| Input voltage(BL) | VBL_I | Ta=25℃ | -0.3 | VDD+0.3 | V | |
| Storage temperature | Tstg | -10 | +60 | ℃ |
|
|
| Operation temperature | Topa | 0 | +50 | ℃ | ||
TFT-LCD Panel Driving:
| DC Electrical Characteristics | ||||||
| Parameter | Symbol | Min. | Typ. | Max. | Unit | Remark |
| +3.3V supply voltage | VDD | +3.0 | +3.3 | +3.6 | V | |
| Permissible input ripple voltage | VRP | - | - | 100 | mVp-p | VDD=+3.3V |
| eDP HPD Signal Characteristics | ||||||
| Parameter | Symbol | Min. | Typ. | Max. | Unit | Remark |
| HPD High level output voltage | VOHHPD | VDD-0.1 | ||||
| HPD Low level output voltage | VOLHPD | |||||
| eDP AUX Channel Characteristics | ||||||
| Parameter | Symbol | Min. | Typ. | Max. | Unit | Remark |
| Unit Interval for AUX channel | UIAUX | 0.4 | 0.5 | 0.6 | S | |
| Peak-to-peak voltage at TP1 | VAUX-DIFF-pp | 0.32 | - | 1.36 | V | |
| AUX DC Common mode Voltage | VAUX-DC-CM | 0 | - | 2.0 | V | |
| AUX Short current limit | IAUX_SHORT | - | - | 90 | mA | |
| AUX CH termination DC resistor | RAUX_TERM | - | 100 | - | Q | Differential input |
| AUX AC coupling capacitor | CAUX | 75 | - | 200 | nF | |
| Number of pre-charge pulses | Pre-charge pulses | 10 | - | 16 | - | |
| eDP AUX Channel Characteristics | ||||||
| Parameter | Symbol | Min. | Typ. | Max. | Unit | Remark |
| Link clock down spreading | Down_Spread_Am plitude | 0 | 0.5 | % | ||
| Differential Peak-to-peak Input Voltage at Rx package pins | VRX-DIFFp-p | 90 | 1200 | mV | ||
| Differential Return Loss at 1.35GHz at Rx package pins | RLRX-DIFF | 9 | - | - | dB | |
|
Differential termination resistance |
RRX-TERM | - | 100 | - | Q | |
| RX short circuit Current Limit | IRX-SHORT | - | 50 | mA | ||
| Lane Intra-pair Skew at RX package pins | TRX-SKEW- NTRA- PAIR-High-Bit-Rate |
- |
- |
TBD | ps | |
Backlight Driving:
The backlight system is an edge-lighting type with white-LED.
(It is usually required to measure under the following condition: Ta=25C±2C)
| Parameter | Symbol | Min. | Typ. | Max. | Unit | Remark |
| Supply voltage | VBL | 7.0 | 12.0 | 21.0 | V | |
|
Current dissipation |
IBL |
- |
(227) | (251) | mA | VBL=12V Duty Ratio=100% |
| (135) | (135) | mA | VBL=7.9V Duty Ratio=40% | |||
| Modulated light signal voltage | VPWM H | 1.85 | - | VDD | V | |
| VPWM L | 0 | - | 0.7 | V | ||
| Brightness Control Duty Ratio | Duty | 1 | - | 100 | % | |
| Brightness Control pulse width | TPWM | 5 | - | - | ps | |
| Brightness Control frequency | PWM | 200 | - | 2,000 | Hz | |
| LED-BL ON/OFF High voltage | VCNT H | 1.8 | 3.3 | 3.6 | V |
Optical Specification:
| Paramete | Conditions | Min. | Typ. | Max. | Unit | |
|
Viewing Angle(CR>10) |
Horizontal | L | - | 89 | - |
degree |
| R | - | 89 | - | |||
| Vertical | T | - | 89 | - | ||
| B | - | 89 | - | |||
| Contrast Ratio | Center | 700 | 1000 | - | - | |
| Response Time | Tr+Td | - | 25 | ms | ||
|
CF Color Chromaticity(CIE1931) |
Red x |
Typ. -0.05 |
TBD |
Typ. +0.05 |
- | |
| Red y | TBD | - | ||||
| Green x | TBD | - | ||||
| Green y | TBD | - | ||||
| Blue x | TBD | - | ||||
| Blue y | TBD | - | ||||
| White x | (0.313) | - | ||||
| White y | (0.329) | - | ||||
| NTSC ratio | % | (72) | - | |||
| Luminance of white | YLI | 220 | cd/m | |||
Reliability Test Items:
| No. | Test Item | Conditions |
| 1 | High temperature storage test | Ta=60℃ 72h |
| 2 | Low temperature storage test | Ta=-10℃ 72h |
| 3 |
High temperature & high humidity operation test |
Ta=40℃90%RH 72h (No condensation) |
| 4 | High temperature operation test | Ta=50℃ 72h |
| 5 | Low temperature operation test | Ta=0℃ 72h |
Handling Precautions:
1.This module has its circuitry PCBs on the side and should be handled carefully in order not to be stressed.
2.Laminate film is attached to the module surface to prevent it from being scratched. Peel the laminate film off slowly just before the use with strict attention to electrostatic charges. Ionized air shall be blown over during the action. Blow off the 'dust' on the polarizer by using an ionized nitrogen gun, etc. Working under the following environments is desirable.