Shenzhen FRIDA LCD Co., Ltd
Corporate mission: Promote smart AIOT and enable smart product applications. Corporate vision: Build a leading brand in AIOT field of audio and video solutions. Core values: To achieve customer first,
Add to Cart
10.1 Inch Tft Lcd Display 1280x800 With Edp Interface 30 Pins 250 Nits
General Description:
GV101WXM-N81 each pixel is divided into RED, GREEN, BLUE dots which are arranged in vertical stripe and this module can display 16.7M colors. The TFT-LCD panel used for this module is adapted for a low reflection and higher color type.
Specifications:
| Parameter | Specification | Unit | Remarks |
| Active area | 216.96(H) × 135.60(V) | mm | |
| Number of pixels | 1280(H) × 800(V) | pixels | |
| Pixel pitch | 56.5(H) × 169.5(V) | ㎛ | |
| Pixel arrangement | Pixels RGB stripe arrangement | ||
| Display colors | 16.7M(6bits + Hi-FRC) | colors | |
| Display mode | Transmission mode. Normally Black | ||
| Outline Dimension | 228.3× 149.05 × 2.4typ. | mm | |
| Weight | 155(max) | gram | |
| Surface Treatment | HC Glare | ||
| Back-light | Bottom edge side, 1-LED Lighting Bar Type | 36* LED Array |
Absolute Maximum Ratings:
| Parameter | Symbol | Min. | Max. | Unit |
| Power Supply Voltage |
VDD |
-0.3 | 4.2 | V |
| Logic Supply Voltage |
VIN |
Vss-0.3 | VDD+0.3 | V |
| Operating Temperature | TOP | 0 | +50 | ℃ |
| Storage Temperature |
TST |
-20 | +60 | ℃ |
Electrical Specifications:
| Parameter | Min. | Typ. | Max. | Unit | Remarks | |
| Power Supply Voltage |
VDD |
3.0 | 3.3 | 3.6 | V | |
| Power Supply Current |
IDD |
- | 212 | 272 | mA | |
| Positive-going Input Thresh old Voltage |
VIT+ |
- |
- |
100 |
mV |
Vcm = 1.2V typ. |
| Negative-going Input Thresh old Voltage |
VIT- |
-100 |
- |
- |
mV |
|
|
Differential Input Voltage |
VID |
380 |
- |
1200 |
mV |
|
|
Power Consumption |
PD |
- |
0.7 | 0.9 | W | white pattern |
|
PBL |
- |
1.8 | 1.84 | W | W/I Driver | |
|
Ptotal |
- |
2.5 |
2.74 |
W |
||
Interface Connection:
| Terminal | Symbol | Functions |
| Pin No. | Symbol | Description |
| 1 | NC | NC |
| 2 | GND | Ground |
| 3 | EDP-RX1N | eDP RX channel 1 negative |
| 4 | EDP-RX1P | eDP RX channel 1 positive |
| 5 | GND | Ground |
| 6 | EDP-RX0N | eDP RX channel 0 negative |
| 7 | EDP-RX0P | eDP RX channel 0 positive |
| 8 | GND | Ground |
| 9 | AUX-P | eDP AUX CH positive |
| 10 | AUX-N | eDP AUX CH negative |
| 11 | GND | Ground |
| 12 | VDD | Power Supply, 3.3V |
| 13 | VDD | Power Supply, 3.3V |
| 14 | BIST | Aging Mode Power Supply |
| 15 | GND | Ground |
| 16 | GND | Ground |
| 17 | HPD | HPD |
| 18 | LED_GND | LED_GND |
| 19 | LED_GND | LED_GND |
| 20 | LED_GND | LED_GND |
| 21 | LED_GND | LED_GND |
| 22 | LED_EN | LED_EN |
| 23 | LED-PWMIN | LED PWMIN |
| 24 | NC | NC |
| 25 | NC | NC |
| 26 | VLED | LED Power Supply (4.5V - 12V) |
| 27 | VLED | LED Power Supply (4.5V - 12V) |
| 28 | VLED | LED Power Supply (4.5V – 12V) |
| 29 | VLED | LED Power Supply (4.5V - 12V) |
| 30 | NC | NC |
Optical Specification:
| Parameter | Symbol | Condition | Min. | Typ. | Max. | Unit | |
|
Viewing Angle range |
Horizontal | Θ3 |
CR > 10 |
80 | 85 | - | Deg. |
| Θ9 | 80 | 85 | - | Deg. | |||
| Vertical | Θ12 | 80 | 85 | - | Deg. | ||
| Θ6 | 80 | 85 | - | Deg. | |||
| Color Gamut | - | 50 | - | % | |||
| Luminance Contrast ratio | CR | Θ = 0° | 600 | 800 | - | ||
| Luminance of White | 5 Points | Yw |
Θ = 0° |
- |
250 |
- |
cd/m2 |
|
White Luminance uniformity |
13 Points |
ΔY5 |
62.5 |
71.4 |
- |
||
|
White Chromaticity |
Wx |
Θ = 0° |
Typ. -0.03 | 0.313 | Typ.+0.03 | ||
|
Wy |
0.329 | ||||||
|
Reproduction of color |
Red |
Rx |
Θ = 0° |
Typ. -0.03 |
0.590 |
Typ. +0.03 |
|
| Ry | 0.353 | ||||||
| Green |
Gx |
0.326 | |||||
| Gy | 0.570 | ||||||
| Blue |
Bx |
0.157 | |||||
|
By |
0.116 | ||||||
| Response Time (Rising + Falling) | TRT |
Ta= 25℃ Θ=0° |
- |
30 |
- |
ms | |
| Gamma Scale | 2.0 | 2.2 | 2.4 | ||||
| Cross Talk | CT | Θ = 0° | - | - | 2.0 | % | |
Handling Precautions:
1.It is indispensable to drive the LCM within the specified voltage limit since the higher voltage than the limit causes LCM's life shorter. An electro-chemical reaction due to DC causes undesirable deterioration of the LCM so that the use of DC drive should avoid.
2.Do not connect or disconnect the LCM to or from the system when power is on.